Today I am having a look at the Innokin Cool Fire IV TC100 iSub V Tank Kit, I have been using this Innokin package for a few days now and having used many Innokin Cool Fire mods over the last few years, I have to honestly say that this is by far the best Innokin mod I have tried, with wattage to temperature control ability, a 2 AMP charging feature and the Temperature Control Ramp Up?PRE BOOST?feature, the Innokin Cool Fire IV TC100 is just faultless and with Innokin’s record on producing safe and reliable hardware we certainly do have a close to perfect package here.
Innokin have updated their ever popular Cool Fire 4 mod to introduce us to the newer Innokin Cool Fire IV TC100, what Innokin have done is to increase the battery from an internal 2000mAH size to a 3300mAH power cell, they have given us 100 watts as an upgrade from 40 Watts and we now have the temperature control facility as a huge added bonus.
Where I think the Innokin Cool Fire IV TC100 really shines is that we now have the ability with the temperature control to use all wire types, so not only do we get the standard wattage mode for Kanthal wire we also get to use NI200, Titanium and Stainless Steel wires and Stainless steel can also be used in wattage mode as well as temperature control mode, more often than not, most TC mods only allow Kanthal and two other TC wires but Innokin have given us the ability to use all wire types here.
In The Box we get :
The Innokin Cool Fire IV TC100 Mod
An Innokin iSub V Tank
A 0.5? iSub Kanthal BVC Coil
A 0.5? iSub SS 316L BVC Coil
A Micro USB Charging Cable
A Spare Delrin Drip Tip
Some O-Rings and a Vape Band
The User Manual
The Innokin Cool Fire IV TC100 iSub V Tank Kit allows for any of Innokin’s iSub coils to be used so we really are spoilt for choice from over ten different coils on the market currently, but the fact that this TC100 kit is supplied with both a Kanthal BVC coil and a Stainless Steel 316L coil means that you can use wattage or TC modes right away.
The Innokin iSub V Tank features the Innokin patented No Spill Coil Swap system which makes sure coil replacement is easy and mess free, we also have a spring loaded 510 connection with stainless steel threading, one of the best overall features for me is the fast 2 Amp charging feature and the ability of a pass through for vaping while charging.
The Innokin Cool Fire IV TC100 iSub V Tank Kit specs :
Standby current: 200uA max
Maximum output Wattage: 100W
Maximum working Current : 30A
Maximum output Voltage: 7.5V
Atomizer Resistance: 0.1Ohm (Minimum)
Charging: 5 Volt / 2 Amp Fast Charging Supported
Operating TC Range: 150-315?C, 300-600?F
TC Mode: Ni (0.1-0.2 Ohm), Ti (0.1-0.5Ohm) ,SS 316L (0.2-1.0Ohm)
I have always liked the Innokin Cool Fire line of mods, they tend to all work flawlessly and over the years have just gotten better and better as Innokin push them selves to develop an all round perfect setup, well! I think this time they have done it, firstly, Innokin are all about safety so when using their devices I have absolutely no worry that the device is going to be safe to use providing I use it properly, the display on the Innokin Cool Fire IV TC100 is great, Innokin design their own boards in their mods and this one being the AETHON chip certainly handles the power pass through really well, the display is clear to read and provides all the info you need in both wattage and temperature control modes.
One of the features that I really liked about the Innokin Cool Fire IV TC100 iSub V Tank Kit is that when you add a tank on to the mod, you usually have to go in to a menu and tell the mod that you have added a new tank and coil, but with the Innokin Cool Fire IV TC100, as soon as you screw on a tank, the mod asks you if it is the same coil you were using or is it a new Kanthal, SS, NI200 or Titanium coil, it’s a really nice feature, the temperature control feature is spot on, I was vaping on a Stainless Steel 316L coil at 480F degrees with a 50 watt power boost and the tank and mod were hitting spot on every time with not one dry hit what so ever, I have to say that the TC100 is my favourite Innokin mod to date and I am really liking the iSub V Tank as it fills easily and offers me the ability to use any of the iSub coils available.
If you use an Innokin device and you need to treat yourself to an upgrade, then I can highly recommend the Innokin Cool Fire IV TC100 iSub V Tank Kit, having the Temperature Control facility there is just perfect and with Stainless Steel coils you can use both TC or Wattage mode with the same coil, it really is a no brainer, the Kit for the Innokin Cool Fire IV TC100 with?iSub V Tank is available on the Vapour-Shack.com website or if you are in the Stoke On Trent area then pop in to our shop and we will be pleased to show you the kit in person.
This week?I got hold of the Innokin Coolfire Mini Complete Vaping System with Slipstream Tank included?as a?kit, in the hand I will just say that this? is one STEALTHY mod,?this device is so small and yet so mighty in power that you can have it in your hand while out and about and no one would ever know, it’s such a small stealthy package but it has power by the bucket load.
In The Box you will get :
The Innokin Coolfire Mini Device
The Slipstream Tank
2 x 0.8 ohm Kanthal Coils (20w – 35w)
Micro USB Charge Cable
Spare O-Rings for Tank
A Silver Drip Tip (Metal)
A Black Drip Tip (Plastic)
Some Innokin Stickers
The Innokin Coolfire Mini Complete Vaping System with Slipstream Tank box has all the upcoming TPD regulation notifications on view?as well as?the standard Innokin Authenticity and Security Scratch and Check sticker so you can check that this is a genuine Innokin product, it’s a small compact box for this?compact and powerful vaping system.
The Specs of the Device :
6 – 40 Watts Precise Output
3 – 7.5 Volts
Will fire down to 0.2 Ohms Resistance
Micro USB Charging
1300 mAH Internal Lipo Battery
Stainless Steel 510 Connection
Over Discharge Protection
The Coolfire Mini device is tiny in my hand but I just can’t get over how solid and well made it is, although! it shouldn’t surprise me,?Innokin always make rock solid and reliable devices, this device measures just 63mm tall without the slipstream tank fitted and you can totally understand why it is called a mini mod,?also the device only weighs 79 grams so you would not even notice this in your bag or pocket, have I told you that this mod is compact?
When I think back to all the Coolfire Devices that Preceded the Innokin Coolfire Mini it shows you how far Innokin have come in producing us such an exceptional piece of?hardware for us to use today, the Coolfire line started with the Coolfire 4 which in relative terms was quite a chunky device, next came the Coolfire 4 Plus followed quickly by the Coolfire 4 TC 100 and the Coolfire 4 TC 18650 which were all large devices and once you added a tank on top were by no means small pocket able devices, so to put it in to perspective the Innokin Coolfire Mini Complete Vaping System with the Slipstream Tank fitted is smaller than any of the previous Coolfire mods on their own with no tank fitted, that shows you how small this fantastic kit is and how well Innokin have progressed over the years.
The Innokin Coolfire Mini is a stand alone Variable Wattage and Variable Voltage device, there is no Temperature Control here?as the size of the device would of had to?of been much?bigger, the Coolfire Mini has?an air fed 510 connection on top that can comfortably hold an old style bottom pin tank that needed air flow from the 510 connector but with today’s modern tanks this is not needed but Innokin have thought about us retro vapers with all our old bits of kit too, we have a curved style fire button on the Innokin Coolfire Mini which is very comfortable to use and a very good LCD screen to give us the info we need at a glance, the Plus and Minus buttons are small and tactile?and the USB connector is very solid and usable for charging the device, we have safety vent holes on the side of the device for our protection and?the device is available?in various colours including??Black, Blue, Pink, Silver & Purple.
The Slipstream tank is a top air hole fed tank with a bottom coil placement this means the air will feed down from the triple adjustable air slots go down through the chimney in to the outer wall of the coil, then feed up inside the coil to give you the exceptional flavour and vapour that this tank is capable of providing, this way of circulating air flow helps in keeping your coil cool which in tern produces a better flavour?from your e-liquid,?the coils also have large juice slots so? they will wick very well indeed even using a thicker liquid and the tank will hold 2ml of juice which?is TPD Compliant, this tank is a perfectly matched tank for the Innokin Coolfire Mini device giving you a superb vape in a very small package.
So in summary the Innokin Coolfire Mini Complete Vaping System with Slipstream Tank is a great system if your after a nice stealthy vaping device while out and about, it will fit in your pocket and you wouldn’t even know it was there, the Innokin Coolfire Mini Complete Vaping System with Slipstream Tank would also make a fantastic device for a new vaper, this is because it has no fancy bells and whistles that would confuse a person new to vaping, you simply just fit a coil, choose your wattage and vape away, it’s a simple yet small and compact device that is practical both inside and outside for both advanced vapers that want a discreet device or for the newbie that wants?a first device and one that gives a?great vape.
Please visit the sales page HERE at www.vapour-shack.com
The Endura T18 Complete Vaping System by Innokin has been built and aimed squarely at the brand new vapers out there.
We will take look at the specs for the Innokin Endura T18 Kit and then go in depth at what the T18 Complete Vaping System can offer new vapers.
Innokin Endura T18 Complete Vaping System Box
Optimized power output and tank design delivering amazing flavour and vapour.
Easy to charge 1000mAH battery with overheat protection.
Easy top-fill? 2.5ml tank.
Pyrex Glass & quality Stainless Steel.
Simply fill with your favourite e-liquid. click the button and vape away.
The kit contents for the Endura T18 from Innokin contain:
The Endura T18 personal vaporizer
A Prism T18 tank
A set of two 1.5ohm coils
A micro USB charging cable
An Endura T18 user manual
A couple of spare drip tips & Spare O-rings
A plastic stand for standing up your device when not in use.
In Depth with the T18 Complete Vaping System:
The solid cardboard for the Innokin T18 Complete Vaping System is of a high quality so already gets you thinking that the contents will be of the same.
The magnetic flap opens showing off the Endura T18 battery, Prism Tank and Accessory compartment, the box was enclosed with an outer sleeve there is also?a ?Scratch & Check Authenticity label.
There is an instructional insert on the inside lid showing the T18 battery device configuration, how to get it put together, filled and working quickly.
The instructional insert is a very welcome addition seeing as this kit is aimed at a person who is just starting out in to vaping, Innokin have thought about this well.
Innokin Endura T18 Complete Vaping System Pieces
The Endura T18 Complete Vaping System by Innokin is available in the colours of Black, Pink, Blue or silver, we’ll look at the silver here.
The Battery unit of the Endura T18 is a nice sized tube containing the 1000mAH battery, it has a single three click on/off fire button and has an LED light around the button?showing useage & charge status.
The bottom of the T18 battery has a USB port for charging and this is hidden and covered by a nifty sliding door.
With 14 Watts Regulated on the T18 battery and a plethora of Protections built in, this is a capable and pretty safe device for the very new vaper.
The Complete Vaping System T18 kit offers you a tank to match the colour of the battery and holds 2.5ml of your favourite tasting e-liquid.
The Prism T18 Tank has a Top-Fill system that is so easy to use for a new vaper, simply unscrew the tanks lid and pour e-liquid down the side of the tube and replace the lid.
The Prism tank from Innokin also has the No Spill Coil Swap System for very easy coil replacement.
The T18 prism tank houses one of the 1.5ohm coils that is supplied and there is also a second coil for when the first one needs replacing.
The Endura T18 Complete Vaping System is squarely aimed at the brand new vaper that is looking for their first device to use while they give up the cigarettes.
Innokin Endura T18 Complete Vaping System Setup
There has always been a need for this type of kit and gradually they have come to the market and have gotten better and better.
Innokin have done well here learning from their past?and?supplying not only a beginner kit that works but a kit that gives a solid vaping experience and a device that should convert any smoker in to a vaper.
The Endura T18 Complete Vaping System by Innokin has to get a thumbs up, it’s here for a purpose and it will do?what is required as everything needed is within the kit.
If your wanting your first kit or you know someone who wants to quit smoking, you can see more info on the T18 kit and purchase this Innokin product HERE.
The Innokin Endura T22 Complete Vaping System is a device that is perfect for beginners and great for vapours.
Lets take a look at the specs for the Endura T22 and then go in depth at what the Innokin Complete Vaping System is all about.
Innokin Endura T22 Complete Vaping System Specs:
An Optimized power output and tank design delivering amazing flavour and vapour.
A Long lasting and easy to charge 2000mAH battery with safety protection.
An Easy top-fill Tank which is 4.5ml.
All Stainless steel and Pyrex glass quality.
In the kit for the Endura T22 from Innokin you will receive:
An Endura T22 personal vaporizer
A Prism T22 tank
Two 1.5ohm coils
One micro USB charging cable
The Endura T22 user manual
A couple of spare drip tips
In Depth with the Innokin Endura T22 Complete Vaping System:
The packaging for the Complete Vaping System from Innokin is very nice indeed, you get a nice magnetic flap box holding the Endura T22 device and Accessories.
The?box sleeve includes the Scratch & Check Authenticity label, all this just shows quality packaging on the part of Innokin.
Lifting the magnetic lid on the box of the Endura T22 Vaping System your presented with a nicely laid out insert showing the T22 battery device and the matching tank.
The Accessories are held in a separate compartment to the T22 mod and Tank.
The inside lid offers a quick instruction guide so that you can have the complete vaping system up and running quickly.
The Complete Vaping System kit is available in the colours of Black, Silver or Blue, Blue is the colour we are looking at today.
The Battery mod unit of the Endura T22 is a fantastically styled device that screams elegance, clean lines, a single three click on/off fire button and the charging USB port.
This Innokin device holds a Real 2000mAH battery which should give you plenty of vaping time based on your own personal needs.
The 14 Watt Regulated battery portion of the T22 also has all the Overheat and Safety Protections built in with your safety in mind.
The Complete Vaping System kit offers you a tank to match the colour of the battery device that can hold 4.5ml of your e-liquid.
The T22 Tank has the simple Top-Fill system lid that is so easy to use when refilling.
The Endura tank also has the Innokin No Spill Coil Swap System for easy changing of your coils.
The T22 tank also holds a 1.5ohm coil of which two are supplied with this kit.
The Endura T22 Complete Vaping System is a very good kit from Innokin while supplying a tank that can hold 4.5ml of liquid is a bonus.
Everything speaks of quality here from Innokin, the vape I received was pleasant while using the Endura kit, a no fuss tank, a battery mod that lasted me the day and the looks are amazing.
Innokin have done well with the style of the Endura T22, it’s a sleek, Elegant and a very able vaping system that just works.
If your interested in seeing more of this kit, please visit us in store at Vapour Shack or see more about the T22 Kit and PURCHASE HERE.